Ұ

1
Product part numbers may have changed. Please contact your local TDW representative to verify.
3-WAY™ Full Encirclement Tapping Tee

Equipment Type

Three Way Brand Split Tee Fitting

Pressure/ANSI Class

ISO-ANSI-Class-600

Size

ISO-sizes-4-12-inch

3-WAY™ Full Encirclement Tapping Tees are full-branch or reducing-branch split tees designed for use when installing branch lines.

Specifications

  • 4-inchthrough 12-inch, other sizes available by request
  • Pipe type: Steel
  • ANSI flange class 600
  • Compatible with Class 600 flanges (ASME B16.5 or ASME B16.47 Series A).
  • Design pressure:1480 PSI (102 bar) at 0.50 design factor and design temperature at -50°F to 250°F (-46°C to 121°C)
  • Fitting type: Tapping tee

Key Features

  • Full-branch or reducing-branch split tees
  • Equipped with LOCK-O-RING® and LOCK-O-RING® Plus flanges to accept LOCK-O-RINGand LOCK-O-RINGPlus completion plugs
  • Furnished with LOCK-O-RING and and LOCK-O-RINGPlus flanges, permitting removal of the SANDWICH® valve after work is completed
  • Welded per procedures qualified by ASME IX. All pressure containment welds are 100% volumetrically inspected

Common Applications

  • Installing branch lines
  • Completing hot tap branch connections on below grade piping without the need for a permanent valve below grade

3-WAY™ Full Encirclement Tapping Tees are full-branch or reducing-branch split tees designed for use when installing branch lines.

Equipment Type

Pressure/ANSI Class

Size

Specifications

  • 4-inchthrough 12-inch, other sizes available by request
  • Pipe type: Steel
  • ANSI flange class 600
  • Compatible with Class 600 flanges (ASME B16.5 or ASME B16.47 Series A).
  • Design pressure:1480 PSI (102 bar) at 0.50 design factor and design temperature at -50°F to 250°F (-46°C to 121°C)
  • Fitting type: Tapping tee

Key Features

  • Full-branch or reducing-branch split tees
  • Equipped with LOCK-O-RING® and LOCK-O-RING® Plus flanges to accept LOCK-O-RINGand LOCK-O-RINGPlus completion plugs
  • Furnished with LOCK-O-RING and and LOCK-O-RINGPlus flanges, permitting removal of the SANDWICH® valve after work is completed
  • Welded per procedures qualified by ASME IX. All pressure containment welds are 100% volumetrically inspected

Common Applications

  • Installing branch lines
  • Completing hot tap branch connections on below grade piping without the need for a permanent valve below grade